background image

14

WARNINGS: 

Failure to fasten and tighten the harness system 

correctly may allow the child to be ejected from the child restraint in 
a crash or sudden stop causing serious injury or death.

Do not mistake comfort for safety. Harness system must be snugly 
adjusted.

Removing Harness System

2.

 

From Back, 

Remove Harness 
Strap Loops From  
Splitter Plate

4. 

Unthread Chest 

Clip

3.

 Pull Harness 

Strap Out of 
Shoulder   Harness 
Slots

13

1.

 

Fully Loosen 

Harness Strap

Push down on 
harness release 
lever (under flap on 
front of seat pad) 
while pulling out on 
harness strap as 
shown.

Only remove the harness system to clean the seat pad.   

To Remove Child From Child Restraint

1.

 Loosen Harness Strap

2.

 Unbuckle Harness

3.

 Release Chest Clip

4.

 Remove Child

continued on next page

A snug harness strap should not allow any slack. It lies in a relatively straight line 
without sagging. It does not press on the child’s flesh or push the child’s body into 
an unnatural position.

4358-6590B Scenera NEXT.indd   19-20

4358-6590B Scenera NEXT.indd   19-20

5/6/15   3:25 PM

5/6/15   3:25 PM

Summary of Contents for Scenera Next































Reviews: