34
33
5.
Place Child
Restraint Rear
Facing in Back Seat
For children who
cannot sit up
unassisted
, the level
line on shell
MUST
be
parallel with the ground.
For children who can sit up unassisted
,
you may rotate the child restraint to be
more upright.
3.
Reach Under
Pad and Pull Hook
Across to Opposite
Side
Do not twist belt
.
4.
Finished LATCH
Routing
1
2
Belt
MUST
be in
front
of buckle strap.
You
MUST
use the 1st or 2nd buckle
slot.
Do not
place belt over child’s legs.
6.
Hook LATCH to
Vehicle Anchor
7.
Tighten Belt
Place hand in child
restraint.
Firmly push child
restraint down and
back towards the
vehicle seat back
while pulling free end
of belt to tighten.
It may be easier to
pull pad away from
shell and tighten
the belt through the
belt path opening as
shown.
8.
Check Belt
Tightness
Hold child restraint
at the belt path with
your weakest hand.
Push and pull from side to side.
If it moves more than 1 in. (2.5 cm), try
pulling the belt tighter, try reinstalling
the child restraint, try another seating
location, or switch to using the vehicle
belts.
continued on next page
4358-6590B Scenera NEXT.indd 32-33
4358-6590B Scenera NEXT.indd 32-33
5/6/15 3:25 PM
5/6/15 3:25 PM
