23
24
Installing Harness System
WARNINGS:
Do not use child restraint without the seat
pad. Failure to do this can result in serious injury or death.
Cleaning Pad and Accessories
Machine wash separately with cold water on a gentle cycle. Do
not use bleach. Tumble dry separately for 10-12 minutes on low
heat. Remove immediately.
To clean canopy,
hand wash using warm sudsy water. Line dry.
Cleaning Harness Strap
Spot clean using warm sudsy water and damp cloth.
Replacing Pad
Starting from top of child restraint, slip pad on shell. Push pad
tabs at top of shell through slots in pad. Pull harness adjustment
strap through slot in pad. Wrap pad around bottom of shell.
Attach the tabs on the sides to shell. Attach elastic straps to the
belt path guide.
Install harness system. See pages 24-26.
3.
Pull Pad off Tabs from
Top of Shell
4.
Remove Pad from the
Bottom of Shell
Remove pad from shell.
1.
Insert Buckle’s Metal
Retainer into Slot
Closest to Child
Buckle
MUST
face out.
2.
Pull Metal Retainer
Completely Through
Pad and Shell
3.
Check Buckle
Pull up on buckle to make sure it
is secured.
The buckle
MUST
not pull out.
4.
Rethread Harness Strap
continued on next page
