30
Accessories on Select Models
Child Restraint Use
Never take your child out of the child restraint while the
vehicle is moving.
Never leave child unattended.
Placing your child in a hot child restraint may result in
burns.
Do not use a child restraint with damaged or missing parts.
Do not use cut, frayed or damaged harnesses.
Do not substitute parts or try to modify the child restraint in
any way.
Do not lubricate buckles and fasteners.
Do not use any child restraint accessory except those
approved by Dorel Juvenile Group.
Never allow any child to play with this child restraint; it is
not a toy.
Do not remove or cover up any of the warning labels or
other labels on the child restraint.
Read all instructions for additional warnings.
On the side of the child restraint there is a date of manufac-
ture label. Do not use this child restraint more than 8 years
after the date of manufacture.
Installation in Vehicle
Check the vehicle belt or lower anchor belt before each use.
Use only if the belt is tightened properly and locked securely
in place.
This child restraint should be securely belted in the vehicle
even when not in use. In a crash or sudden stop, an unse-
cured child restraint could injure occupants.
Do not use a child restraint that has been in a crash. You
must get a new child restraint.
29
Basic Insert
When using the infant insert, make sure it
does not cover your infant’s face in any-
way. Remove the insert for older babies.
To remove infant insert,
Unthread the
harness from the harness adjustment
brackets.
Pull harness through the top slots and
remove the insert.
Rethread the harness straps into the har-
ness adjustment brackets.
Reverse to install the infant insert.
Deluxe Insert
When using the infant insert, make sure it
does not cover your infant’s face in any-
way. Remove the insert for older babies.
To remove infant insert,
undo the fasten-
ing strips and pull the infant insert out
from behind the harness straps.
To install infant insert
, undo the fasten-
ing strips and fi t the head/hip roll behind
the harness straps. Refasten the fastening
strips.
