To Remove Existing Harness Tongues and Buckle and Attach Replacement Buckle
Smart Seat® Buckle Replacement Guide
©2014 Graco PD272023C 5/14
Remove the chest clip. DO
NOT DISCARD the chest
clip.
5
Lift back cover up and
then rotate back as
shown.
4
Do not remove the
elastic straps at the
top. Remove the back
cover by removing the 2
screws.
2
Loosen straps by lifting
lever and pull harness
straps out.
1
10
Unbuckle harness by
tilting top of buckle
down, press top of red
button, and pull
tongues out of buckle.
Remove seat from base.
3
8
Turn seat upright. Pull
harness straps out from
the seat.
7
Pull harness straps out
from behind the bar
6
Remove the harness strap
loops from splitter plate.
9
MAKE SURE headrest is
not in highest position.
Lay the seat on a table or
ÀRRUZLWKWKHEDFNIDFLQJ
up.
You will receive ONE of
these Graco approved
replacement buckles.
Follow instructions for
proper installation.
