- 15 -
DST countdown mode
¾
In the stop state, press “MODE” key, MANUAL LED light will bright, the DIST window will flash.
¾
Press “SPEED+/SPEED-” key to adjust the setting value.
¾
Press “START” key, the motor will run after the countdown of 3 seconds. The initial speed is 1.0km/h.
¾
After countdown finished, the speed would stop slowly (All the values will not change during this time) with 5
times alarm sound (one time/sec).
PROGRAM mode
¾
In the stop state, press “MODE” key , the PROGRAM LED light will bright , the setting of P1-P6 will display in
the CAL window. The time window will flash.
¾
Press “SPEED+/SPEED-” key to adjust the setting value.
¾
Press “START” key, the treadmill will run according to the setting speed of PROGRAM.
¾
After countdown finished, the speed would stop slowly (All the values will not change during this time) with 5
times alarm sound (one time/sec)
.
KEY INSTRUCTION
MODE
¾
In the stop state, press “MODE” key, the “MODE” key will work (In the PAUSE state, the keys do not work.
¾
Normal – time countdown – CAL countdown – DST countdown – PROG1 – PROG2 – PROG3 – PROG4 –
PROG5 – PROG6 be displayed in turn.
¾
Press “MODE” key, all the setting value will be cleared , it will display a initial value and flash in the setting
window.
SPEED+
¾
In the running state, press this key to increase 0.1km/h every time. If you press it without leaving, the speed will
increase quickly.
¾
In the stopping state, the setting value of flashing window will increase. If you press it without leaving, the
setting value of flashing window will increase quickly.
SPEED –
¾
In the running state, press this key to decrease 0.1km/h every time. If you press it without leaving, the speed will
decrease quickly.
¾
In the stopping state, the setting value of flashing window will increase. If you press it without leaving, the
setting value of flashing window will increase quickly.
START/STOP
¾
Press it for a short time, the treadmill will pause or start. Press it for 2 seconds, the speed is 0km/h. The speed
will stop slowly until stop.
DISPLAY INSTRUCTION
¾
PULSE: Display pulse value. If there is not pulse value, it will display “P”.
¾
SPEED: If “00”
stands for in the stop state, others stand for the setting speed at present. If display “PUS” stands
for pause.
¾
DISTANCE: Display distance value.
¾
CAL: Display CAL value.
Summary of Contents for SX-1122
Page 1: ...TREADMILL MANUAL SX 1122...
Page 5: ...5 EXPLORE DRAWING...
