Gator Mini-ITX – Installation Guide
Use this screen to view the ATAPI CD-ROM drives in the system. To access this screen, select ATAPI CDROM
Drives on the Boot Setup screen and press <Enter>.
Security Setup
ezPORT Password Support
Two Levels of Password Protection
ezPORT provides both a Supervisor and a User password. If you use both passwords, the Supervisor password must
be set first. The system can be configured so that all users must enter a password every time the
system boots or when ezPORT Setup is executed, using either or either the Supervisor password or User password.
The Supervisor and User passwords activate two different levels of password security. If you select password
support, you are prompted for a one to six character password. Type the password on the keyboard. The password
does not appear on the screen when typed. Make sure you write it down. If you forget it, you must drain NVRAM
and reconfigure.
Remember the Password
Keep a record of the new password when the password is changed. If you forget the password, you must erase the
system configuration information in NVRAM. See (Deleting a Password) for information about erasing system
configuration information.
Select Security Setup from the ezPORT Setup main BIOS setup menu. All Security Setup options, such as password
protection and virus protection, are described in this section. To access the sub menu for the following items, select
the item and press <Enter>:
•
Change Supervisor Password
•
Change User Password
•
Clear User Password
Supervisor Password
Indicates whether a supervisor password has been set. If the password has been installed,
Installed
displays. If not,
Not Installed
displays.
User Password
Indicates whether a user password has been set. If the password has been installed,
Installed
displays. If not,
Not
Installed
displays.
Change Supervisor Password
Select this option and press <Enter> to access the sub menu. You can use the sub menu to change the supervisor
password.
Change User Password
Select this option and press <Enter> to access the sub menu. You can use the sub menu to change the user password.
Clear User Password
Select this option and press <Enter> to access the sub menu. You can use the sub menu to clear the user password.
Boot Sector Virus Protection
This option is near the bottom of the Security Setup screen. The Optimal and Fail-Safe default setting is
Disabled
Disabled
Set this value to prevent the Boot Sector Virus Protection. This is the default setting.
Enabled
Select Enabled to enable boot sector protection. ezPORT displays a warning when any program (or virus)
issues a Disk Format command or attempts to write to the boot sector of the hard disk
drive. If enabled, the following appears when a write is attempted to the boot sector. You may have to type N several
times to prevent the boot sector write.
Boot Sector Write!
Possible VIRUS: Continue (Y/N)? _
26
Summary of Contents for Gator Mini-ITX
