Corvalent Gator Mini-ITX Installation Manual Download Page 6 | Manualshive

Page: 6 / 71

background image

Gator Mini-ITX – Installation Guide

Introduction

Thank you for your purchase of the Gator Mini-ITX industrial embedded motherboard. The Gator Mini-ITX design
was based on the Intel 855GME chipset providing the ideal platform to industrial applications. The Gator Mini-ITX
design is based on the Intel Pentium M and Celeron M (µFC-PGA 478) processors.

With proper installation and maintenance, your Gator Mini-ITX will provide years of high performance and trouble
free operation.

This manual provides a detailed explanation into the installation and use of the Gator Mini-ITX industrial embedded
motherboard. This manual is written for the novice PC user

/

installer. However, as with any major computer

component installation, previous experience is helpful and should you not have prior experience, it would be prudent
to have someone assist you in the installation. This manual is broken down into 3 chapters and 4 appendixes.

Chapter 1 - System Board Pre-Configuration

This chapter provides all the necessary information for installing the Gator Mini-ITX. Topics discussed
include: installing the CPU (if necessary), DRAM installation and jumper settings. Connecting all the
cables from the system board to the chassis and peripherals is also explained.

Chapter 2 - BIOS Configuration

This chapter shows the final step in getting your system firmware setup.

Chapter 3 - Upgrading

The Gator Mini-ITX provides a number of expansion options including memory. All aspects of the upgrade
possibilities are covered.

Appendix A - Technical Specifications

A complete listing of all the major technical specifications of the Gator Mini-ITX is provided.

Appendix B - Flash BIOS Programming

and Codes

Provides all information necessary to program your AMIBIOS8 Flash BIOS. POST Codes and beep codes
are described in details.

Appendix C – On-Board Industrial Devices

Two on-board 10/100 (10/100/1000 optional) Ethernet controllers (second Ethernet optional), six serial
ports (one optional RS422/485), watchdog timer and DC power connector for brick power supply
(optional).

Appendix D - On-Board Video Controller

On-board CRT and LVDS (optional) video controller.

IV

«
...
4
5
6
7
8
...
»

Summary of Contents for Gator Mini-ITX








































































Reviews:

No comments

Related manuals for Gator Mini-ITX

Brand: Kaba Pages: 16

Brand: Silicon Laboratories Pages: 18

Brand: MSI Pages: 186

Brand: ASROCK Pages: 114

Brand: Supero Pages: 90

Brand: Xilinx Pages: 56

X58 PLATINUM SLI - Motherboard - ATX

Brand: MSI Pages: 74

Brand: NXP Semiconductors Pages: 35

Brand: MSI Pages: 171

Brand: ITX SECURITY Pages: 18

Brand: Freescale Semiconductor Pages: 160

Brand: MSI Pages: 90

Brand: Pericom Pages: 8

Brand: Acorp Pages: 46

Brand: EVGA Pages: 163

Brand: MATSONIC Pages: 76

P4 Titan GA-8SIMLH-P

Brand: Gigabyte Pages: 104

Brand: ON Semiconductor Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands