Cortelco 730901-TP2-27F Installation And Operating Instructions Manual Download Page 15

Page: 15 / 20

Preparing for Use

Before you can use cordless telephone ,you must charge the

HANDSET

for 12

hours. Failure to do so will require recharging of the BATTERY PACK more often.
(

See page 26 for more information on the BATTERY PACK)

1. Place the

HANDSET

on the

BASE UNIT

for 12 hours .

2. After 12 hours ,remove the

HANDSET

from the BASE UNIT.

3. Raise or reposition the

BASE UNIT ANTENNA

for the best reception.

NOTE:

Depending on the frequency of use, once the

HANDSET

is fully charged , it remains

functional for approximately 4 hours of continuous use and approximately three days
when the

HANDSET

is off the

BASE UNIT

in STANDBY mode.

Receiving calls

1. When the phone rings, lift the

HANDSET

and

press the

button. The

HANDSET

LCD

Screen will display "CALLS" and "TALK",and
the

BASE UNIT

IN USE LED indicator will

light up.
2. Start your conversation
3. To end your conversation, either press the
button or place the

HANDSET

on the

BASE UNIT.

If you place the HANDSET on the

BASE UNIT CHARGE CRADLE, you activate
the automatic STANDBY feature.

NOTES:

1. The Call Timer will start to count once you press the button.
2. The LCD Screen emits light for 8 seconds every time you press any of the
TELEPHONE KEYPAD buttons.

Cordless Telephone Operation

CALLS

When "CALLS"appears on the LCD Screen,
it means the

HANDSET

IS OFF-HOOK

(connected to the telephone line).

Minutes

Call Timer Display

Seconds or Channel (Press the scan/del
button to display the channel).

CALLS

TALK

TORAL

Function Operation

This unit contains the following special functions:

A. LANGUAGE F. AREA CODE

B. FIRST RING ON/OFF G. FLASH TIME

C. TIME SET H. PAUSE TIME

D. RINGER VOLUME I. VOICE MAIL

E. LCD CONTRAST J. MSG WAITING

Caller ID System Operation

TORAL

KEYPAD Button

To access, press the button and hold down while in STANDBY mode,

then press the TELEPHONE KEYPAD buttons or the SCROLL

DOWN button.

/ VOICE MAIL

Summary of Contents for 730901-TP2-27F





















Search results

Summary of Contents for 730901-TP2-27F

Reviews:

Related manuals for 730901-TP2-27F

Brands by name

Popular brands

Cortelco 730901-TP2-27F, Installation And Operating Instructions Manual

Search results

Summary of Contents for 730901-TP2-27F

Reviews:

Related manuals for 730901-TP2-27F

Brands by name

Popular brands