RE/PA
SAVE
EDIT
/FLASH
Call Waiting
When you subscribe to a Call Waiting service from your local telephone company, this
telephone will display the name and number of the second caller while you are having
a phone conversation with your first caller.
1. When you are having a conversation ,this tele-
phone will automatically display the name and
number of the second caller.
2. Press the /FLASH button to answer the
second caller .The first caller's name. and
number will be displayed.
3. When you have finished ,press the /FLASH
button to continue with your conversation with
the first caller.
If you do not want to interrupt your phone conversation
with the first caller, you can advise the second caller to
leave a Voice Mail message instead.
Voice Mail Function
When there is a Voice Mail message for you, the "MSG"icon on the LCD Screen and the
MESSAGE WAITING LED indicator will blink.
1.To access your Voice Mail message, press the button.
2. After you hear a dial tone, press the /
VOICE MAIL
button. This will automatically
dial the Voice Mail Post Code in your area and connect you to the Voice Mail service
provider.
NOTE:
You should store the Voice mail Post Code number by using the Voice Mail
function on page 23.You can also call your Voice Mail service provider by
dialing the Voice Mail Post Code number after pressing the button,
"C-F"(Call Forward )
Appear on the upper left hand side, when the incoming call has been assigned to your
telephone number.
"L-D-C" (Long Distance Call)
Appears on the upper left hand side, when the incoming call is a long distance call and
the service is provided by your local telephone company.
Caller List
Records call information for up to 80 incoming calls such as caller's name and
telephone number together with the date and time of the call .After recording a new
incoming call, the NEW CALL indicator will blink and the LCD Screen will look as
shown below:
Caller ID System Operation
12
AM
TOTAL
NEW
No. of new calls.
Maximum calls=80
Saving in the PHONE BOOK
1. Press the button. The LCD screen will display "PHONE BOOK".(a record will be
displayed if the phone book is full, the phone book can story up to 64 records)
2. Press the button to enter new record.
3. Use the TELEPHONE KEYPAD buttons to enter the name (see
page 24 for detail ), the cursor will move after a second, to store a maximum of 16
characters.
4. Press the SCROLL DOWN button once.
5. Enter the telephone number by using the TELEPHONE KEYPAD
buttons. You can store up to 16 digits.
6. Press and hold down the button.
7. Press the button to return to STANDBY mode. (If no active button are pressed
for 20 seconds, the LCD Screen will automatically return to STANDBY mode.)
NOTE:
It will not save a duplicate telephone number or a name without the corresponding
telephone number in the PHONE BOOK.
PREFERRED CALLS
You can assign Preferred Call which will generate a special ringer at the start of the
second ring cycle to welcome any caller in the Phone Book. When you are saving the
name and number into the PHONE BOOK, add a mark at the beginning of the name by
pressing the TELEPHONE KEYPAD button.
BLOCKED CALLS
You can assign a BLOCKED CALL which will disable the ringer sound from the second
ring to any caller in the PHONE BOOK. When you are saving the name and number
into the PHONE BOOK, add an mark at the beginning of the name by pressing the
TELEPHONE KEYPAD button.
Caller ID System Operation
15
~
~
AM
#
NEW
AM
#
NEW
e.g.
e.g.
1st caller
2nd caller
DIR
DIR
DIR
DIR
