MOBILTEX® DATA LTD.
Calgary, Alberta
www.corTalk.com
TITLE:
RMU1 Installation and Configuration Guide
DOCUMENT NO.:
RMU1-MAN-001
SHEET:
37 of 53
REV:
1.14
A shortcut to the configuration application and the RMU1 manual are created in the Windows start menu under the
“RMU1 Configuration Application” folder.
6.2.3
Adobe Acrobat Reader XI
Adobe Acrobat Reader XI is provided on the CD to allow viewing of the PDF version of the RMU1 manual. If Acrobat
Reader is already installed on the PC, it is not necessary to re-install it. To install Acrobat Reader, click on the “Install
Adobe Acrobat Reader XI” button on the RMU1 Installer dialog, and follow the instructions provided by the Acrobat
Reader installation application.
6.3 RMU1 Configuration
Attach the supplied USB cable between the PC and the programming interface. Place the programming interface on the
RMU1 unit as shown in Figure 38. The programmer alignment plate will wedge between the green terminal block and
the body of the RMU1.
Figure 38 RMU1 Programming Interface Installation
Start the configuration software by clicking on “RMU1 Configuration” shortcut in Windows start menu, under the
“RMU1 Configuration Application” folder. If the programmer is not connected to one of your USB ports, you will get
an error message. Simply connect the USB cable to the computer and try again. The following screen will appear.
