HomeVision® Pro/Lite
© Corroventa Avfuktning AB
Rev A
3 (30)
User Manual HomeVision®
Intended use
HomeVision® is developed and intended for wireless control and supervision of Corroventa CTR STD-
TT and CTR 300TT2 crawl space dehumidifiers.
HomeVision® consists of a Control Unit and a wireless Control Panel. The Control Unit is equipped
with built-in temperature and humidity sensor and is mounted in the crawl space and connected to
the dehumidifier. Through use of the Control Panel mounted in the in the apartment the system can
be monitored and its settings adjusted. The Control Panel also displays alarms in case of failures as
well as service reminders for changing filter.
Both versions, Lite and Pro, store log data on USB-stick, supporting service technicians’ in their
installation follow-up and their trouble shooting. The Pro variant also stores a log file in a user
readable format that homeowner himself can use for his own follow-up and analysis.
The Pro version, in addition to all the features of the Lite, also supports Mould Growth Index based
control which for certain installations and circumstances has the potential to lower the energy
consumption even further. Furthermore, the Pro version also has graphic presentation of hours of
operation, average temperature and average humidity.
Features:
•
Control and supervision of crawls
space climate, temperature and
relative humidity
•
Logging of operation and climate data on USB-
stick – available for users of the Pro version
•
Operation indicators and alarms
•
Easy to install – wireless Control Panel
•
Service reminders
•
Graphical display with an easy interface
Manufacturing Directive
HomeVision® Pro and Lite are tested in accordance with LVD and EMC directives. HomeVision® is CE
approved.
Waiver of Liability
•
Faulty, incorrect installations and/or incorrect use can cause damage to property and human
injury.
•
The manufacturer assumes no responsibility or liability for damages or injuries caused by
non-compliance with the instructions herein, use for other purposes than the intended, or
failure to observe its warnings. Such damage, injuries or liabilities are not covered by the
product warranty.
•
The product warranty does not cover consumables or normal wear and tear.
•
It is the responsibility of the buyer to inspect the product at time of delivery and before use
to ensure its good function. The product warranty does not cover damage resulting from use
of faulty products.
•
Changes or modifications to the equipment must not be made without written consent by
Corroventa Avfuktning AB.
•
The product, technical data and/or installation and operation instructions can be changed
without prior notice.
•
This manual contains information that is protected by the Intellectual Property laws. No part
of this manual may be copied, stored in an information system or transferred in any form or
in any way without the written consent of Corroventa Avfuktning AB.
