HomeVision® Pro/Lite
© Corroventa Avfuktning AB
Rev A
12 (30)
Installation
Installation of Control Unit
When installing the Control Unit, prepare the Control Panel by removing the battery protection and
bring it to the crawl space.
1.
Mount the Control Unit where its cable can reach the dehumidifier and where its
measurements of temperature and relative humidity will be representative of the ambient
crawl space environment, securing that:
•
The unit is at approaximately half the height of the crawl space.
•
The unit is not directly affected by the dry air from the dehumidifier.
•
The unit is not directly affected by the wet air from the dehumidifier.
•
The unit is not affected by radiation from heat sources/surfaces hotter than ambient air.
•
The unit is not affected by radiation from surfaces colder than ambient air.
The Control Unit is mounted in bracket, part of the installation kit (Monteringskit TT Multi)
with the sensor downwards
. The bracket is preferably fixed as depicted below.
