CorroVenta A2 ES, User Manual

Page: 4 / 45

© Corroventa Ltd. 2017.05 3 (43)
Manufacturing Directive
CTR A ES machines are CE approved.
Waiver of Liability
•
Faulty, incorrect installations and/or incorrect use can cause damage to property and human
injury.
•
The manufacturer assumes no responsibility or liability for damages or injuries caused by
non-compliance with the instructions herein, use for other purposes than the intended, or
failure to observe its warnings. Such damage, injuries or liabilities are not covered by the
product warranty.
•
The product warranty does not cover consumables or normal wear and tear.
•
It is the responsibility of the buyer to inspect the product at time of delivery and before use
to ensure its good function. The product warranty does not cover damage resulting from use
of faulty products.
•
Changes or modifications to the equipment must not be made without written consent by
Corroventa Avfuktning AB.
•
The product, technical data and/or installation and operation instructions can be changed
without prior notice.
•
This manual contains information that is protected by the Intellectual Property laws. No part
of this manual may be copied, stored in an information system or transferred in any form or
in any way without the written consent of Corroventa Avfuktning AB.
Any comments on the contents of this document shall be sent or addressed to:
Corroventa Avfuktning AB Tel +46 (0)36-37 12 00
Mekanikervägen 3 Fax +46 (0)36-37 18 30
564 35 Bankeryd, SWEDEN E-post mail@corroventa.se