© Corroventa Ltd.
2017.05
21 (43)
Network
Note: Install all the system cables before powering up
the machines.
The CTR A ES is equipped with networking capabilities
enabling local cooperation between the machines such
as pressure drying as well as the use of external
Relative Humidity and Temperature sensors for control
of the machine. The networking capabilities are also a
preparation for a future SuperVision system that will
enable remote monitoring and control of the machines
through Internet.
In order to establish a network, install the machines as
intended and connect the with system cables before
powering them up.
On the machine intended to be Master, to be in control
of the others, enter the Network menu.
Push Create and wait while the machine establishes the
network which can take up to a minute.
Once established, in the network menu, the
presentation will toggle between the slave units which
are referred to with type, for instance A4, and address
on the bus, for instance 101.
In order to change the settings of a slave unit, press
Edit and the select the given slave. As a confirmation of
what unit was selected, the display backlight of the
selected unit will start blinking.
The desired settings can still also be made on the
respective machines themselves.
When all desired settings are made, start the Master
machine and the slaves will be started automatically
within a minute. Similarly, when the machines are to be
stopped, push Stop on the Master machine and the
slaves will soon stop automatically.
As the Master machine is controlling the network, if a
slave unit is started manually when the Master is in
standby, the slave unit will be stopped. Similarly, if a
slave unit is manually stopped while the Master is
running, the slave unit will be started again.
Summary of Contents for A2 ES
