CORRECT CRAFT LINC PANORAY 2021 Page 20 Owner'S Manual Download

Page: 20 / 92

LINC PAN0RAY

OVERVIEW

USING HELM COMMAND - BUTTON SHORTCUTS

A black, rubber keypad surrounds the knob with 5 different buttons.

These buttons act like shortcuts, or hot keys, and allow the user to

quickly jump to certain menus, tabs and frequently used settings.

The Volume, Change Event and Speed Control buttons will each open up

a unique pop-up menu when pressed. Each of those pop-up menus will

close when that same button is pressed again.

USING HELM COMMAND - VOLUME BUTTON

Pressing the Volume button opens a pop-up to allow the operator to

quickly change the volume and the track from any menu (see Fig. B1).

Once the Volume pop-up appears in the center of the screen, the

operator can perform the following functions:

Changing the Volume

- by either rotating the Helm Command

knob either direction or by pressing the plus and minus icons via

touchscreen

Pause/Play (or Mute/Un-mute)

- by pressing down on the Helm

Command knob or by pressing the pause icon via touchscreen.

Changing the Track (or Frequency)

- by either joysticking the

Helm Command knob either left or right, or by pressing the next

track and previous track icons via touchscreen

NOTE:

If the “stereo is off” is listed in this pop-up , simply press down on

the knob to turn the stereo on.

HELM COMMAND

VOLUME

TAB

CHANGE EVENT

SPEED CONTROL

HOME

FIG. B1 - POP-UP AFTER PRESSING THE VOLUME BUTTON ON HELM COMMAND

LINC PAN0RAY

SWITCHING MENU

LIGHTS TAB

The Switching Menu displays digital switches for lights, the heater fan and the

seat heater pads in the driver’s seat.

The Lights tab shows on/off switches for some of the boat’s lighting. Please note

that the Nav/Anchor light switch is located on the keypad below the LINC display.

The Lights tab also displays the current air and water temperatures in the top

portion of the page.

The current on/off state of the passenger seat heater (if equipped) is also shown

on this page, but it cannot be controlled by LINC; that switch is located in the

glove box compartment on the passenger’s side

FIG. J1 - LIGHTS TAB* ON THE SWITCHING MENU

SWITCHING MENU

CLIMATE TAB*

*NOTE

- the heater switches shown in the above example are optional and are

not equipped on every boat. This tab only exists if those heater switch options

are equipped.

From the Climate tab, the operator may turn on/off the heater fan and driver seat

heater.

The Climate tab also displays the current air and water temperatures in the top

portion of the page.

The current on/off state of the passenger seat heater (if equipped) is also shown

on this page, but it cannot be controlled by LINC; that switch is located in the

glove box compartment on the passenger’s side

FIG. J2 - CLIMATE TAB* ON THE SWITCHING MENU

Summary of Contents for LINC PANORAY 2021





























































































Search results

Summary of Contents for LINC PANORAY 2021

Reviews:

Related manuals for LINC PANORAY 2021

Brands by name

Popular brands

CORRECT CRAFT LINC PANORAY 2021, Owner'S Manual

Search results

Summary of Contents for LINC PANORAY 2021

Reviews:

Related manuals for LINC PANORAY 2021

Brands by name

Popular brands