CORRECT CRAFT LINC PANORAY 2020, Owner'S Manual

Page: 46 / 88

LINC PANORAY
46
RIGHT SECTION
SWITCHBOARD TAB - EDITING THE FUNCTIONS
After touching the pencil icon or performing a press-and-hold on the
tab button on the Helm Command, the operator will then see a pop-up
message prompting him/her to “Edit Switchboard Functions”.
7KHȴUVWVWHSLVWRVHOHFWZKLFKFXUUHQWIXQFWLRQ/LQHVRU\RX
would like to replace (see picture on this page). You can either make your
selection via touchscreen or through Helm Command by rotating the
knob and pressing down.
The second step is to then select which new function you would like for
that particular line via touchscreen or Helm Command (see picture on
next page).
3OHDVHQRWHWKDWDOORIWKHGL΍HUHQWSRVVLEOHVZLWFKERDUGIXQFWLRQVDUH
organized into tabs at the bottom of the screen. You may change which
tab is visible through the touchscreen or through the tab button on the
Helm Command keypad.
FIG. D4 - EDIT SWITCHBOARD FUNCTIONS POP-UP