1. The product can be installed in any position other than the direction the reset button faces downward.
2. Main body and subbase
(1) Loosen the main body securing screw shown in Fig. 1.
(2) Hold the subbase and the cover respectively and separate them.
At this time, be careful not to apply excessive force. (Reference: Fig. 2)
(3) Perform installation in the reverse procedure of the above.
3. Installation method of the subbase
(1)
(2) Secure the subbase at the specified position with screws.
At this time, be careful not to apply excessive force to the screws. (Refer to Fig. 8.)
- 3 -
Make knock-out holes for subbase conduits as required, and install the wiring conduits.
(Refer to Fig. 2 and 3.)
Mounting Direction
Fig. 3
Installation and Wiring
Fig. 1
Fig. 2
Securing screw
Reset button (Blue)
Subbase
Indicator
LED
Knock-out hole for conduit
Pg11(φ19)
×
4
Knock-out hole for conduit
Pg11(φ19)
×
4
Installation and Wiring
