* PRECAUTIONS *
1. Absolutely avoid the following installation locations.
○
Locations where there are special chemicals or corrosive gases.
○
Locations where there are water droplets or excessive humidity.
○
Locations exposed to high temperatures.
○
Locations subject to prolonged vibration.
2. Perform installation and wiring according to this instruction manual.
3. The product should be handled by only an experienced technician with sufficient knowledge.
4. Connect the power supply after completing all wiring.
Mistakenly touching a terminal may cause electric shock or damage.
5. The load connected to each terminal should be within the rated load in the specifications.
6. Supply the same power voltage and frequency as those indicated on the product.
7.
8.
9.
Contact failure may generate high-frequency radio waves which may cause malfunction.
10.
- 2 -
Installation and Wiring
Do not bundle the power cable or the high-voltage cable of the ignition transformer with the flame
rod cable. Also do not arrange the wiring of them closely. Otherwise, this may cause
malfunction of
the burner controller.
Arrange the high-voltage cable wiring separately while the cable is kept 10 cm or more away from the
burner controller.
After completing the wiring, be sure to check that the wiring is correct. Wrong wiring may cause
damage or malfunction.
Connect the high-voltage cable of the ignition transformer properly to avoid contact failure.
When timers or auxiliary relays are used for additional functions, select reliable ones and build a
correct circuit.
In addition, install the ignition transformer directly to the burner housing or to the metal part
electrically connected to the burner housing.
2
