27
4.4.6 Print model
This screen summarizes the droplet dispensing process. You can monitor the activity of the device while dispensing. In addition, you can
change the parameters such as printbed temperature and printhead temperature.
2
1
4
3
1. Printbed temperature: Allows you to
activate/deactivate, change, and monitor
the temperature of the printbed.
2. Temperature: Allows you to activate/
deactivate, change, and monitor the
temperature of the printhead.
3. Dispensing parameters.
4. Extrusion: Extrude low volumes of material
before starting the printing process to
prime the nozzle.
It is recommended to prime the nozzle prior to printing. This can be done through the Extrusion button on the Printer model screen
or through the Extrude Volume Function in the Prepare Bioprint section of the LCD interface on the bioprinter. Press Start to start the
dispensing process.
You can pause the process at any point. After pausing, you can resume or cancel dispensing.
1. Progress indicator: Displays progress of the dispensing process as a percentage (%). This is calculated by considering the total number
of droplets to be dispensed and the droplet which is being currently dispensed.
2. Pause or resume: Tap to pause the bioprinting process. When the process is paused, tap to resume the bioprinting process.
3. Stop: Tap to stop the bioprinting process. You can restart a print over again after pressing stop to cancel it.
1
3
2
