17
2
1
3
4
14. Extra retract: The volume of bioink retracted back up into the nozzle after the print is finished. If printing with temperature-sensitive
materials, increase the extra retract to protect the bioink from heat until the start of a new print.
15. Postflow stop time: The time the print movement is delayed after each filament. Increase the postflow stop time if the end of the
filament is not complete due to the start of the next move before the bioink is properly extruded.
16. Z-lift: The lowering of the printbed when performing non-print moves. Increase the z-lift if the nozzle is dragging in a previously
printed filament during a non-print move.
For more detailed information on how parameter selection impacts a print, please refer to the Corning® Matribot® Bioprinter Parameters
(CLS-AN-648).
4.3.6 Models settings
Press on the Models icon on the bottom of the window to move to the next step of the process.
This screen enables many of the options and settings for adjusting properties of 3D models. It also allows the user to add multiple 3D
models to be printed in one printing session.
1. Model: Add multiple models to the same
project and select which model is currently
being adjusted.
2. Scale: Scale the model.
3. Rotation: Rotate the model.
4. Translation: Translate the model from the
default position.
