Standard Recommended Procedure 003-1002-AEN | Issue 7 | January 2019 | Page 19 of 25
Step 2: Housing/Chassis Location (Figure 29)
Identify location within the frame or cabinet (in rack units from the bottom) by locating the top/left
corner of the housing/chassis. Print two labels and adhere one to the front chassis door using the crop
mark for alignment. Adhere the second label to the label card on the inside of the door.
Figure 29 — Housing/Chassis Label Location
Step 3: Tray Location (Figure 30))
Identify location of tray within the housing/chassis. Trays come pre-labeled 01 to XX from the bottom
to the top of the chassis.
Figure 30 — Tray Label Location
