ONE SD-LAN Wall
Mount Splitter Housing
(1LAN-SPLT-132-486C)
STANDARD RECOMMENDED PROCEDURE 000-000-AEN | ISSUE 1 | MARCH 2018 I
Page 5
6
Installing Feeder Cable|
Step 1
Remove the hole plug for the feeder entry port. Install an appropriate size fitting and conduit (if
conduit is used) per standard local practices and ensure proper sealing. Feed the end-point cables
into the housing through the fitting.
Figure 6
Step 2
Strip 65 inches of the feeder cable jacket with proper cable entry tools
Step 3
Route one loop of the fiber around the radius guides in clockwise direction.
Step 4
Bring fibers to splitter pigtail connection in inside center of housing
Figure 7
Step 5
Terminate fiber and connect to splitter input adapter.
Step 6
Route and secure spare fibers so they will not be damaged.
