Cornelius JetSpray JS7C, Operator'S Manual

Page: 9 / 20

Operator’s Manual
© 2009, IMI Cornelius Inc. - 5 - Publication Number: 620047630OPR
4. Check that bowl spout gasket is mounted properly to the base assembly, as shown in Figure 3.
Figure 3
5. Slide bowl over the cooling dome and assemble the bowl to the dispenser. Be careful not to wrinkle
the gasket. If gasket is wrinkled, beverage will leak out of bowl. (See Figure 4.)
Figure 4
6. Locate the blade in the bowl. The magnet self-locates the blade, once it is moved into position. Make
sure blade bearing is in place before placing it in the bowl, as shown in Figure 5.
Figure 5
7. Replace push handle and pinch tube.
a. Push the handle assembly straight up through the rectangular hole until the clips snap into
place. (See Figure 6.)
Bowl Spout Gasket