Cornelius JetSpray JS7C, Operator'S Manual

Page: 8 / 20

Operator’s Manual
Publication Number: 620047630OPR - 4 - © 2009, IMI Cornelius Inc.
INSTALLATION AND OPERATING INSTRUCTIONS
S
ETTING
U
P
Y
OUR
JS7C
1. Set dispenser chassis in desired location. Dispenser should be level and located on a solid counter.
2. Be sure dispenser has adequate free space on both sides; approximately 3" away from any wall or
obstruction.
Cleaning the Dispenser
1. Removing the push handles. (See Figure 1)
Figure 1
a. Push handle back until it stops.
b. Grasp the clips on the handle. Squeeze clips until they are free from the panel. Pull straight
down on the handle.
2. Disassemble the bowl, lid, gasket. and pump housing assemblies.
CAUTION: Abrasive cleaners scratch plastic parts. NO NOT USE abrasive cleaners.
To Assemble
1. Slide the drip tray with grill into place.
2. Consider installation of a drain hose which connects to the outlet on drip tray bottom (Part No. S-
3379).
3. Turn bowl upside down and insert gasket into groove. Wet gasket for ease of insertion, pressing gas-
ket into groove while following the number sequence (1 - 8) shown in Figure 2.
Figure 2
Sealing Button
Spout
Tube Path
Handle
Clips
Handle Support