manualshive.com logo in svg

Cornelius A.B.S. Unit, Operator'S Manual

Share
Download
Cornelius A.B.S. Unit Operator'S Manual Download Page 29

Automated Beverage System

© 1999 The Coca-Cola Company, Cornelius and 
McDonald’s Corporation. All Rights Reserved.

29

Cup Tubes Configuration

The cup tube configuration is 1 – Small; 1 – 
Child; 1 – Large; 1 – Medium; 1- XL.

The cup tube configuration for Australia is 1 – 
Small; 2 – Large; 2 – Medium. 

The hole mounting pattern is such that the cup 
tubes will only mount in one location.

Rotating The Cup Turret

While in the manual mode – press the Cup 
Size button corresponding to the cup tube you 
wish to install. The turret will rotate until the 
correct turret face is forward, allowing easy 
mounting of the cup tube. In the standard con-
figuration, the 5th cup size is not being used.

If there are two medium cup tubes, when but-
ton #3 is pressed once the first medium turret 
cup face is forward, the second time it is 
pressed the second medium turret face will 
rotate forward.

Other Cup Configuration

The unit can be configured with four or five 
cup sizes. If only four cup sizes are needed, 
usually two medium cup tubes are used.

The second medium cup tube can be omitted 
and an extra large cup substituted. The extra 
large cup tube mounting location can be iden-
tified by pressing cup size button #5.

A.B.S. unit Major Subsystems Operation —

Turret

MD

Summary of Contents for A.B.S. Unit

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands