Cormach MEC 200 TRUCK, Use And Maintenance Manual

Page: 9 / 44

Use and Maintenance Manual – 09/2016 Rel. 0 Page 3
2. INTENDED USE
This manual is an integral part of product.
Read carefully warnings and instructions contained in this manual because they provide important information about SAFE USE and
MAINTENANCE.
KEEP WITH CARE THIS MANUAL NEAR THE MACHINE TO FACILITATE ANY CONSULTATION BY OPERATORS.
The wheel balancers of the range MEC have been made to be used in balancing of wheels cars (car), off-road vehicles (SUV), truck
(TRUCK).
The machines can work on wheels with diameter from 1" to 35" (or from 25 to 890 mm) and width from 2" to 20" (or from 50 to 500
mm). All functions and controls are set through a series of buttons placed on a panel. The data are displayed on a led display.
3. SAFETY RULES
The wheel balancer must be used exclusively for the purpose it was designed for.
Any other use is considered INCORRECT and UNREASONABLE.
The use of wheel balancer is allowed only to authorized and trained personnel.
Do not put objects in the base which may affect the correct operation of wheel balancer.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY DAMAGE TO PERSONS OR PROPERTY CAUSED BY
UNAUTHORIZED PERSONNEL OR FROM USE IMPROPER, INCORRECT AND UNREASONABLE OF THE WHEEL
BALANCER.
THE WHEEL BALANCER SHOULD NOT BE MODIFIED OR TAMPERED WITHOUT PERMISSION OF
MANUFACTURER. ANY UNAUTHORIZED MODIFICATION MADE TO THE EQUIPMENT RELIEVES THE
MANUFACTURER FROM ANY LIABILITY IN CASE OF DAMAGE ATTRIBUTABLE TO SUCH ALTERATIONS.
TAMPERING OR REMOVAL OF SAFETY DEVICES IS A BREACH OF THE EUROPEAN RULES RELATING TO SAFETY
AT WORK.
3.1 Safety devices
The speed of rotation is less than 100 RPM for which the wheel guard is not mandatory.
It is forbidden to tamper with, bypass or remove the safety devices installed because is a violation for the directives on safety and
health at work.
THE REMOVAL OR TAMPERING FOR THE SAFETY DEVICE IS A VIOLATION OF THE SECURITY EUROPEAN
DIRECTIVES.
4. TRANSPORT AND HANDLING
The wheel balancer is packed in a carton box on a pallet.
Transport and handling must be carried out ONLY BY AUTHORIZED PERSONNEL, with pallet truck or forklift and adopting the
appropriate safety measures.
Net weight (Kg) Gross weight (kg) Lenght with lift (mm) Width (mm) Height (mm)
MEC 200 TRUCK 270 300 1500 600 1340
If the machine is not packed, observe following precautions:
PROTECT THE SHARP EDGES AT THE ENDS WITH SUITABLE MATERIAL (Bubble wrap or cardboard).
DO NOT USE METAL WIRE ROPES FOR LIFTING BOARD.