Cormach MEC 200 TRUCK, Use And Maintenance Manual

Page: 20 / 44

Use and Maintenance Manual – 09/2016 Rel. 0 Page 14
13. CONTROL PANEL
The machine control panel is shown in picture F13.1. The control panel allows the operator to give commands and enter or modify
data. The same control panel displays the balancing results and machine messages. The functions of the various sections of the
control panel are described in table T13.1. The rear side of the control panel contains the CPU-C1 electronic board that collects,
processes and displays data.
Figure F13.1: Control panel
Table T13.1: Functions of different parts of the control panel
Pos. Description
1 Wheel type light indicator CAR/TRUCK/SUV. Gruppo di tre indicatori luminosi (rossi) per indicazione del Tipo di Ruota
selezionato.
2 Unit of measure light indicator: inches (red led on) – mm (red led off).
3 – 8 Display shows unbalance value inside – outside.
4 – 9 Light indicators show angular unbalance position inner - outer.
5 Stand-by light indicator.
6 Light indicator for automatic acquisition system of dimensions wheel is turned on (red led) – turned off (red led off) or
flashing temporarily disable.
7 Program Type light indicator (STD/ALU/ALUS). Group of 3 light indicators (red led on) indicate the Program Type selected.
10 Imbalance Position light indicator. Group of 4 lights indicators (red led on). Position depends by the Program and Wheel
Type selected.
P7 F key to access the secondary function of the keys (P7).
P8 Start key to start the motor (P8).
P9 Key for automatic search of unbalance angular position (P9).
P10 Stop key to stop the motor (P10).
[P1] [P2] [P3]
[P4] [P5]
10
[P6]
[P8]
[P9]
[P10]
3
2
1
4
5
6 7
8
9