Cormach MEC 200 TRUCK, Use And Maintenance Manual

Page: 17 / 44

Use and Maintenance Manual – 09/2016 Rel. 0 Page 11
9. ENVIRONMENTAL INFORMATION
THE DISPOSAL PROCEDURE DESCRIBED BELOW ONLY APPLIES TO MACHINES WITH
THE SYMBOL OF THE WASTE BIN WITH A BAR ACROSS IT ON THEIR DATA PLATES.
The crossed-out bin symbol, placed on the product and on this page, reminds the user that the product must be disposed of properly
at the end of its life. This product may contain substances that can be hazardous to the environment and to human health if it is not
disposed of properly. We are therefore providing you with the information below in order to prevent these substances from being
released into the environment and to improve the use of natural resources.
Electrical and electronic equipment must never be disposed of in the usual municipal waste but must be separately collected for their
proper treatment.
Thus, the hazardous consequences that non-specific treatments of the substances contained in these products, or improper use of
parts of them, may have on the environment or on human health are prevented. Furthermore, this helps to recover, recycle and
reuse many of the materials contained in these products. Electrical and electronic manufacturers and distributors set up proper
collection and treatment systems for these products for this purpose. At the end of the product’s working life contact your supplier
for information about disposal procedures. When you purchase this product, your supplier will also inform you that you may return
another worn-out appliance to him free of charge, provided it is of the same type and has provided the same functions as the product
just purchased.
Any disposal of the product performed in a different way from that described above will be liable to the penalties provided for by the
nation regulations in force in the country where the product is disposed of.
Further measures for environmental protection are recommended: recycling of any packaging of the product and proper disposal for
used batteries (only if contained in the product).
Your help is critical to reduce the amount of natural resources used for manufacturing electrical and electronic equipment, minimize
the use of landfills for product disposal and improve the quality of life, preventing potentially hazardous substances from being
released in the environment.
10. TECHNICAL DATA
General features
Power supply voltage 1Ph 230 V 50/60 Hz
Power consumption 0.37 kW
Balancing speed < 100 RPM with CAR wheel
< 80 RPM with TRUCK wheel
Maximum unbalance calculated 999 g.
Accuracy with CAR wheel type X1 (1 g. or 0.1 ounces)
X5 (5 g. or 0.25 ounces)
Accuracy with TRUCK wheel type X1 (10 g. or 0.5 ounces)
X5 (25 g. or 1 ounces)
Shaft diameter 40 mm. x 4
Working environment temperature da 0 a +45 °C
Storage temperature da -10 a +60 °C
Storage relative humidity 20% ÷ 95% without condensation
Machine weight (without accessories) 270 Kg.
Noise Level < 70 dB(A)
10.1 Machine dimensions
Depth mm. 600
Width without lift (with base) mm. 1070
Width with lift mm. 1500
Height mm. 1340