Warning
Install, use and maintain this equipment according to Corken’s instructions and all applicable federal, state, local laws
and codes. Periodic inspection and maintenance is essential.
Corken One Year Warranty
CORKEN, INC. warrants that its products will be free from defects in material and workmanship for a period of
one year from date of installation, provided that the warranty shall not extend beyond twenty-four (24) months from
the date of shipment from CORKEN. If a warranty dispute occurs, the DISTRIBUTOR may be required to provide
CORKEN with proof of date of sale. The minimum requirement would be a copy of the DISTRIBUTOR’S invoice to
the customer.
CORKEN products which fail within the warrant period due to defects in material or workmanship will be repaired
or replaced at CORKEN’s option, when returned, freight prepaid to CORKEN, INC., 9201 North I-35 Service Road,
Oklahoma City, OK. 73131.
Parts subject to wear or abuse, such as mechanical seals, blades, piston rings, valves and packing, and other parts
showing signs of abuse, neglect or failure to be properly maintained are not covered by this limited warranty. Also,
equipment, parts and accessories not manufactured by CORKEN but furnished with CORKEN products are not
covered by this limited warranty and the purchaser must look to the original manufacturer’s warranty, if any. This
limited warranty is void if the CORKEN product has been altered or repaired without the consent of CORKEN.
All implied warranties, including any implied warranty of merchantability or fitness for a particular purpose, are
expressly negated to the extent permitted by law and shall in no event extend beyond the expressed warranty period.
CORKEN DISCLAIMS ANY LIABILITY FOR CONSEQUENTIAL DAMAGES DUE TO BREACH OF ANY WRITTEN OR
IMPLIED WARRANTY ON CORKEN PRODUCTS. Transfer of toxic, dangerous, flammable or explosive substances
using CORKEN products is at the user’s risk. Experienced, trained personnel in compliance with governmental and
industrial safety standards should handle such substances.
Important notes relating to the European Union (EU) Machinery Directive
Compressors delivered without electric motors are not considered as machines in the EU Machinery Directive. These
compressors will be delivered with a Declaration of Incorporation. The fabricator of the machinery must assure and
declare full compliance with this Directive before the machine in which the compressor will be incorporated, or of
which it is a part, is put into service.
Contacting the Factory
Before contacting the factory, note the model and serial numbers. The serial number directs Corken personnel to a
file containing all information on material specifications and test data applying to the product. When ordering parts,
the Corken service manual or Installation, Operations, and Maintenance (IOM) manual should be consulted for the
proper part numbers. ALWAYS INCLUDE THE MODEL NUMBER AND SERIAL NUMBER WHEN ORDERING PARTS.
The model and serial numbers are shown on the nameplate of the unit. Record this information for future reference.
Model No.
Serial No.
Date Purchased
Date Installed
Purchased From
Installed By
2
