Corghi PW IW 10, Manual

Page: 24 / 124

24 User manual
PW IW 6” 8” 10”
INTroDUCTIoN
The purpose of this manual is to furnish the owner and operator of this Corghi machine with
a set of practical and safe instructions for the use and maintenance of the PW winder.
Follow all the instructions carefully and your winder will assist you in your work and give
lasting and efficient service in keeping with CORGHI traditions.
The following paragraphs define the levels of danger regarding the machine associated
with the warning captions found in this manual:
DANGER
Refers to immediate danger with the risk of serious injury or death.
WARNING
Dangers or unsafe procedures that can cause serious injury or death.
ATTENTION
Dangers or unsafe procedures that can cause minor injuries or damage to property.
Read these instructions carefully before powering up the machine. Conserve this manual
and all illustrative material supplied with the machine in a folder near the tyre changer
where it is readily accessible for consultation by the machine operator.
The technical documentation supplied is considered an integral part of the machine; in
the event of sale all relative documentation must remain with the jack.
The manual is only valid for the machine model and serial number indicated on the
nameplate applied to the machine itself.
CAUTION
Adhere to the contents of this manual: Corghi declines all liability in the case of actions
not specifically described and authorised in this manual.
NOTE
Some of the illustrations in this manual have been taken from photographs of prototypes;
the standard production model may differ slightly in certain respects.
These instructions are meant for persons with a certain level of mechanical and electrical
expertise. We have therefore condensed the descriptions of each operation by omitting
detailed instructions regarding, for example, how to loosen or tighten the fixing devices
on the machine. Do not attempt to carry out procedures which exceed your level of pro-
ficiency, or which you do not have experience with. If assistance is required, contact an
authorised service centre.