30
Artiglio 50
- Kit PAX System
UNPACKING / ASSEMBLY
ATTENTION
Carry out carefully the unpacking, assem-
bly and installation operations described
below.
Failure to observe these recommendations
may cause damage to the elements of the
PAX System wheels Kit, and jeopardise
the safety of the operator.
- Free the PAX System wheels Kit from any
packaging it has. Check it has not suffered
any damage during the transportation.
Place the elements that make up the PAX
System wheels Kit so that they cannot fall
and be damaged.
- The PAX System wheels Kit contains the
following six elements (fig.1):
A) tool with reversible roller. Character-
ised by an A1 roller, and an A2 support
(specially shaped for fixing to the bead
breaker arm via the appropriate holes)
B) Kit 10 Reglette. A special element in
plastic, to protect the rim. Equipped
with a central tang with a notch, it allows
the insertion of the upper bead breaking
lever, thereby keeping the rim intact
C) upper bead breaking lever
D) tyre bead-holding belt.
1
A
A1
A2
B
D
C
DESCRIPTION
ARTIGLIO 50 in configuration
for PAX System wheels
ARTIGLIO 50 in configuration for PAX System
wheels allows you to easily break the beads,
disassemble and assemble any type of the
above-mentioned tyres with a rim diameter
from 360 to 560 mm. In any phase during
which the machine works with the horizontal
wheel blocked and perfectly centred on the
turntable device.
The drive commands are on the bead
removal command push-button panel
- fig.2.
The configuration assumed allows the op-
erator to work in complete safety, without
having to move from his work position.
ARTIGLIO 50, in configuration for PAX
System wheels, maintains the objectives
reached in the traditional version:
- reducing the physical effort applied by
the operator;
- guaranteeing the total safety for the rim,
insert and tyre cover.
2
