40
Artiglio 50
- Kit PAX System
21C
22
TYRE ASSEMBLY
The PAX System contains (fig.23 ):
1. A special profile PAX System rim (T) (for
full-width or clipped support).
2. Support (S) (for full-width or clipped
support).
3. PAX tyre cover (R).
4. Pressure control sensor.
Assembling the support in the
tyre
- Spread the special PAX System gel of the
mechanical support on the inner part of
the tyre cover fig.24.
- Lubricate the beads of the PAX tyre cover
(R) and the surface of the support (S)
that will be in contact with the rim, using
a standard lubricant for vehicle wheels
assembly fig.25.
IMPORTANT
When lubricating the inside of the tyre
with the special PAX System gel of the
mechanical support, take care not to dirty
the beads (on which a standard lubricant
for tyres will be used).
- Insert the Support (S) in the tyre cover
(R) fig.26.
ATTENTION
The support (S) must be introduced in
the tyre in the correct direction, as shown
in Fig.27a (for standard) and fig.27b (for
clipped).
