Corghi A 2005, Operator'S Manual

Page: 54 / 180

54
A 2030 - A 2025 - A 2020 - A 2015 - A 2005
operator’s manual
DANGER
Before carrying out any maintenance operation or topping up with lubricant, discon-
nect the machine from the compressed air supply line.
Check the lubricant level periodically through the windows provided and top up as shown
in fig.25c. Top up only with SAE20 non detergent oil to a total quantity of 50 cc.
The FR filter regulator unit is equipped with an automatic system for drainage of the con-
densation water, so in normal conditions it does not require any particular maintenance.
However, the water may be drained by hand at any time (fig.25d).
Normally it is not necessary to remove the cups, but this may be necessary after long
periods out of use; if the cup cannot be removed with the hands only, use the spanner
provided (fig.25e).
Clean with dry cloth. Avoid contact with solvents.
ATTENTION
Keep the work area clean.
Do not clean the machine with compressed air or jets of water.
When cleaning the area avoid raising dust as far as possible.
ENVIRONMENTAL INFORMATION
Following disposal procedure shall be exclusively applied to the machines having the
crossed-out bin symbol on their data plate .
This product may contain substances that can be hazardous to the environment or to
human health if it is not disposed of properly.
We therefore provide you with the following information to prevent releases of these
substances and to improve the use of natural resources.
Electrical and electronic equipments should never be disposed of in the usual municipal
waste but must be separately collected for their proper treatment.
The crossed-out bin symbol, placed on the product and in this page, remind you of the
need to dispose of properly the product at the end of its life.
In this way it is possible to prevent that a not specific treatment of the substances con-
tained in these products, or their improper use, or improper use of their parts may be
hazardous to the environment or to human health. Furthermore this helps to recover,
recycle and reuse many of the materials used in these products.
For this purpose the electrical and electronic equipment producers and distributors set
up proper collection and treatment systems for these products.
At the end of life your product contact your distributor to have information on the col-
lection arrangements.
When buying this new product your distributor will also inform you of the possibility to
return free of charge another end of life equipment as long as it is of equivalent type and
has fulfilled the same functions as the supplied equipment.