TigoMaster 2TH
– EtherNet/IP
User Manual
Copyright © 2021 CoreTigo Ltd.
Page
24
of
75
4.1. The Mounting Process
4.1.1. Mounting
General Requirements:
•
Allen key for the M4 fixing screws with a hexagon socket
Other Requirements (Without Existing Threaded Hole):
•
M4 thread tap (ready-made or a set of taps)
•
Drilling machine (to pre-drill the mounting holes for the device for mounting on the system)
•
Two M4 hexagon socket head screws, according to DIN 912 / ISO 4762, of suitable length
Prerequisites:
•
The device may only be installed and commissioned by qualified electricians in accordance with EN
50110-1/-2 and IEC 60364
•
Before mounting the device, check for damage, e.g., transport damage
•
Damaged devices must not be put into operation
See section 2 of this user manual for further details on safety.
