VCX-2401-E Installation and Operating Instructions
Page 6
Video IP (multi-cast group)
Group Length
FPS (frames per second)
Maximum Bit Rate (encoder only)
Audio On or Off
Com 1 On or Off
Com 1 Bit Rate
Com 1 IP
Com 2 On or Off
Com 2 Bit Rate
Com 2 IP
Mounting the Encoder
The VCX-2401-E Encoder is a 19-inch wide 1U unit and is furnished with mounting ears
allowing installation in a 19” rack frame. The VCX-2401-E-H is a desktop like unit that is 8.5
inches wide and designed to be a shelf model without the need to mounting. However if you
choose to mount the half size model, extended mounting ears are available. The VCX-2401-E-R
is a single card for use in the multi-card chassis, which is a 19-inch 4U unit that will support 12
cards.
All signal connections are from the rear, eliminating any need for setback from the front
plane of the rack. The user programming port on the front panel is used to alter system
parameters via a Terminal Program such as HyperTerminal.