VCX-2401-E Installation and Operating Instructions
Page 31
SNMP Settings
This command allows the encoder to set the SNMP trap receiver. You may add or remove the receiver
from the encoder.
Format:
SNMPMANAGER [ADD:REMOVE] <n.n.n.n> [abcdef...]
Example:
snmpmanager add 192.168.5.66 public
RWCOMMUNITY
This command sets the read/write community name. (The SNMP Manager must know this
Community name in order to “Get” or “Set” messages.) It allows the SNMP manager to issue “Get” and
“Get Next” messages as well as “Set” messages.
Format:
RWCOMMUNITY <abcdef…>
Example:
rwcommunity private
ROCOMMUNITY
This command sets the read only community name. (The SNMP Manager must know this
Community name in order to “Get” messages.) It allows the SNMP manager to issue “Get” and “Get
Next” messages only.
Format:
ROCOMMUNITY <abcdef…>
Example:
rocommunity public
Miscellaneous Settings
CAMERA [n]
Store a user defined camera type code 0..255
This is a current list of the Cameras we support:
Cohu = 1
Philips_Bosch = 2
Pelco = 3
Vicon = 4
RVision = 5
Panasonic = 6
CAMERAID [n]
Store a user defined camera ID code 0..255