User and Maintenance Manual
Failsafe hydraulic brake ID 2000N
Model ID 2000N-116
Date: 2014/06/27
Revision: 1.1
www.coremo.it
Page
4
of
25
OCMEA can provide you with information, suggestions and assistance regarding correct application and
use.
Use
: Following the mounting and maintenance instructions prevents costly down time and accidents
due to incomplete knowledge of the product. Please note that the initial braking force may be from 30%
to 50% less than the rated value until the brake lining adjusts to the disc.
Rotating parts
: The brakes are coupled mainly with rotating parts. In this case the moving parts must be
protected in conformity with the requirements of DIRECTIVE
2006/42/EC
and Italian Legislative Decree
17/2010
or equivalent legislation in force in the countries in which they are used.
Power source for hydraulic brakes
: Use mineral oil SAE/ISO 46.
Spring loaded failsafe brakes:
Spring loaded failsafe brakes must be handled with special care because
they contain mechanically preloaded springs. In order to avoid the risk of accidents during maintenance
work, it is necessary to follow the instructions in this manual.
Friction material
: All COREMO OCMEA brakes are fitted with friction material which is absolutely free of
asbestos and is declared as NON toxic/harmful in full observance of health and environment regulations
and laws. In any case it is better not to inhale dust produced by them and to wash hands thoroughly
before eating or drinking.
Oils, greases, lubricating components
: These are used in extremely limited quantities. Personnel
suffering from allergies to these substances are advised to wear gloves or use protective cream which
must be washed off thoroughly before eating or drinking.
Cleaning of the product:
Do not wash the product with water or any detergent.
Product markings
: All the data on the plates must always be kept legible. Use the data shown on the
plates when contacting the manufacturer for spare parts, information or assistance for example.
Disposal
: Worn brake linings and other materials of which brakes are made are classified as special NON
toxic/harmful products and therefore must be disposed of in accordance with the laws in force in the
countries in which they are used.
