User and Maintenance Manual
Failsafe hydraulic brake ID 2000N
Model ID 2000N-116
Date: 2014/06/27
Revision: 1.1
www.coremo.it
Page
10
of
25
Figure 2
Personnel assigned to these operations must take special care, working cautiously when
bleeding the circuit, wearing suitable PPE such as gloves, goggles and safety footwear
and taking any other precautions necessary before proceeding.
6.
Rotate the play adjuster (D71244) in the clockwise direction using a CH BR 12 (Photo 6) until
the play between the disc and each lining is 1 mm (Photo 7).
Check the gap between the disc and each lining using a feeler gauge.
Pay particular attention during this regulation because rotating the gap regulator (D71244)
anticlockwise , this could tighten inside the thruster (D71243) and get definitely stuck.
Photo 6
Photo 7
7.
Safety lock of the wear adjuster: to prevent the wear adjuster from rotating or moving while
the brake is in operation due to machine vibration, each brake unit (K9........) has two safety
grub screws (C61579) to lock the adjuster (D71244), located in the part of the thruster which
protrudes from the cover (seat of the safety hook); see also the assembly drawing (A........) to
1 mm
