Corecess R1-SW24L2B, User Manual

Page: 188 / 300

R1-SW24L2B User’s Manual
9-20
Command Task
match tcp-flag <flag-num>
match tcp-spn <tcp-port-num>
match udp-dpn <udp-port-num>
match ucp-spn <udp-port-num>
match vlan-did <vlan-id>
match vlan-sid <vlan-id>
end
5. Return to the Privileged mode.
show classmap <class-map-name>
6. Verify the class map configuration.
y
<class-map-name>
: Class map name.
write memory
7. Save the configuration changes.
Note
:
To delete a class map, enter the
no class-map <class-map-name>
command in the qos
configuration mode. To delete the criteria, enter the
no match
command in the qos configuration mode.
The following example shows how to create a class map and define a classification criterion by
using the source IP address:
(config)# qos
(config-qos)# class-map class1
(config-cmap)# match ip-sa 172.27.2.16 0.0.255.255
(config-cmap)# end
# show classmap
ClassMap
--------------------------------------------------
Name : class1
Match Content : ip-sa 172.27.2.16/0.0.255.255
Total Entries = 1
# write memory
Building Configuration...
[OK]
The following example shows how to create a class map and define the criteria by using the
destination IP address and the destination TCP port number:
(config)# qos
(config-qos)# class-map class2
(config-cmap)# match ip-da 10.10.10.1 0.0.0.255