Corecess R1-SW24L2B, User Manual

Page: 140 / 300

R1-SW24L2B User’s Manual
8-6
Configuring SNMP
SNMP Default Configuration
The default SNMP configuration of the Corecess R1-SW24L2B is as follows:
Table 8-2 Default SNMP configuration
SNMP Configuration Element Default Setting
Agent contact information (MIB-II System Contact variable)
None configured
Agent location information (MIB-II System Location variable)
None configured
Community strings None configured
Trap
None enabled
Trap Host None configured
RMON Enabled
Setting the System Contact and Location Information
In the system group of MIB-II (Public MIB) supported by the Corecess R1-SW24L2B has System
Contact variable and System Location variable displaying the system contact information and
system location information. The values of these variables can be browsed or modified via
ViewlinX, NMS of the Corecess or NMS of other companies.
To specify these values, use the following commands:
Table 8-3 Setting the system contact and location information
Command Task
configure terminal
1. Enter Global configuration mode.
snmp-server contact <string>
2. Set the system contact information.
y
<string>
: String described for system contact information.
snmp-server location <string>
3. Set the system location information.
y
<string>
: String described for system location information.
end
4. Return to Privileged mode.
show snmp-server
5. Verify the system contact and location information.