Corecess R1-SW24L2B, User Manual

Page: 114 / 300

R1-SW24L2B User’s Manual
6-2
Default Port Configuration
The features you can customize have default values that will most likely suit your environment
and probably need not be changed. The default values of these features are set as follows:
Table 6-1 Default port configuration
Item Default setting
Port status Enable
Port name None configured
Port priority level Normal
10/100Base-TX Auto
Data
trasmission
mode
1000Base-PX
1000Base-LX
1000Base-SX
1000Base-TX
Full-duplex, depending on option modules
Port speed Auto
STP status Enabled on eth0 (default VLAN)
10/100Base-TX 19
Cost
1000Base-PX
1000Base-LX
1000Base-SX
1000Base-TX
4
Port STP priority 32
VLAN All ports belong to the default VLAN (ID : 1, name: vlan1)
When change the Ethernet port configurations, the change becomes part of the running
configuration. The change does not automatically become part of the startup configuration file
in Flash memory. If you do not save your changes to Flash memory, they are lost when the
system restarts. To save the Ethernet port configuration changes to Flash memory, you must
enter the
write memory
command in Privileged mode.