Corecess R1-SW24L2B, User Manual

Page: 107 / 300

Basic Configuration
5-39
Configuring to Display Log Messages to a Telnet Sessions
To configure the log messages to display on Telnet sessions, use the following commands in
Global configuration mode:
Table 5-25 Configuring log messages to display on a Telnet session
Command Task
logging session { enable |
disable }
1. Configure whether to display log messages on Telnet sessions.
y
enable
: Displays log messages on Telnet sessions.
y
disable
: Doesn’t display log messages on Telnet sessions.
end
2. Return to Privileged mode.
write memory
3. Save the changed configuration.
The following example configures the system log to display on
Telnet sessions :
# configure terminal
(config)# logging session enable
(config)# end
# write memory
Building Configuration...
[OK]
#