18
Copyright by CORE INSIGHT, INC.
This use manual contents may change without pre-notification.
7 Setup and Operation
7) SLV - Syncronization
Press FUN and NEXT (9
times
). SLV will display. Non is factory default set as
disable mode. Press UP/DOWN to adjust set from non to InV mode for
syncronize pulse timing for same polarity operation. Press FUN to store.
8) ID Set and Change
If user wants to set ID address or change, press FUN and NEXT (10
times
).
Id- will display and immediately change to 0. Press UP/DOWN to adjust
appropriate ID number. Press FUN to store.
