IONIZER USER MANUAL
17
Press FUN and NEXT (7
times
). PH.A will display and immediately change
PH.L. PH.L mode is positive high voltage low level alarm adjustment. User
can adjust low level. Factory default set value is 25.
Press next and PH.O will display. PH.O mode is positive high voltage high
level alarm adjustment in case of short damage. Factory default set value
is 75.
6) High Voltage Power Alarm
7
Setup and Operation
When positive high voltage alarm activated, green LED will turn-on at
top-right corner and red LED will blink with audio alarm at the alarm
status as below.
Press FUN and NEXT (8
times
). NH.A will display and immediately change
NH.L. NH.L mode is negative high voltage low level alarm adjustment. User
can adjust low level. Factory default set value is 25.
Press next and NH.O will display. NH.O mode is negative high voltage high
level alarm adjustment in case of short damage. Factory default set value
is 75.
When negative high voltage alarm activated, green LED will turn-on at
top-right corner and red LED will blink with audio alarm at the alarm
status as below.
