- 16 -
Cod. 1910000002121 - nv00
1. Device overview
Cordivari Heat Manager is a thermostat designed to work with a temperature
sensor that communicates information in real time; this information is used
to manage the auxiliary heating of the water storage in which it is installed,
according to the user’s preferences. In this regard, the user can choose
to manually switch the device on after setting the desired temperature or
can program the switching on by selecting specific time slots and setting
the relevant desired temperature. In addition, the user can also view the
measured temperature trend, the status of the electric heater during the
recorded period, and download the data for the last week. Cordivari Heat
Manager allows to optimise power consumption by programming device
switching on only when necessary.
Cordivari Heat Manager, when installed in combination with solar thermal
systems, also allowsto optimise the use of renewable sources, such as
solar energy, and avoid the consumption of energy from fossil fuels when
not necessary. Whether you would want to have, for an higher energy
request than that the system is able to produce with only the primary
solar power, a storage always at the right temperature, it is necessary
to complete the operation of the system with the use of auxiliary heating
elements, more so, if the solar power is the only source for the production
of domestic hot water.
Once the optimum storage temperature has been set, and this is at a
higher value than the set one, the heating element will not ignite avoiding
unnecessary power consumption. Program the device according to your
own needs, to ensure that the heating element switches on approximately
2 hours before the consumption of domestic hot water.
If the domestic hot water is mainly used in the evening, program the device
so that the heating element is switched on in the late afternoon; if the
storage is already at temperature, it will not be supplied.
It is important to use the device by giving priority for its operation to
renewable energy sources.
Caution!
•
Program the switch-on/off logic of the auxiliary energy
sources by giving overall priority to renewable sources
Caution!
• In order to avoid unnecessary energy and resource
waste, ensure that auxiliary energy source switch-
on/off programming has been correctly completed by
analysing energy consumption of the days immediately
following device installation
•
The device has an IP20 protection rating. Therefore, it
is not suitable for outdoor installations. Install it inside
an electric panel or inside an IP55 rated enclosure.
2.
Specifications
616 mm
451 mm
250 mm
5750 mm
4270 mm
4150 mm
2750 mm
5045 mm
3490 mm
26 mm
4220 mm
2 mm
English
User manual
Summary of Contents for Heat Manager
