Cordis MOBISERV FP7 248434, Manual, Page: 39 / 42

D5.4: Multi-sensor system integrated into wearable fabrics 39/42
MOBISERV FP7 248434
8 Getting started
For a correct use of the smart garments, the user should follow the instructions listed below:
1. Moisten thoroughly the electrodes with tap water.
Figure 19: Procedure to wet the electrodes
2. Wear the shirt, the band or the pyjama and plug the connector to the MOBISERV Data
Logger.
Figure 20: Plugging the connector on the garments
3. Switch on the MOBISERV data logger by pressing on button A; the led will start blinking
green that means the datalogger is ready with Bluetooth ON (see Table 9).
Figure 21: Switching on the electronic