18
Installation and Wiring Instructions for Corbin Russwin WM800
3.4 Wiring the Main Relay to Fail Secure Lock
The door lock is wired to connector P1 on the WM800 main circuit board.
Power for the WM800 unit should be powered
with a 12 or 24 VDC linear, filtered, and
regulated power supply. It is typical for th
e chosen power supply to power BOTH the
WM800 unit and the selected locking device. When using one power supply for both the
WM800 unit and locking device, be sure to include both devices in your current
requirements calculation.
NOTE: We recommend that you ground the power supply to earth ground.
Figure 12 Fail Secure Wiring Diagram
P5
P1
P2
Power
Supply
Corbin Russwin
Locking Devices
listed in the table
below
1
P1
V-
V+
Black (V-)
Red (V+)
Communication Board
Main Control Board
Blue
(Main Relay
C)
Green
(Main Relay N/O)
Black (-)
Red (+)
Electric
Strike
(Fail
Secure)
or
Exit Device ED5000 Series
M94 option Electric Latch
Pullback
ML20900 Series Fail Secure
Solenoid operated Mortise
Lock
CL33900 Series Fail Secure
Solenoid operated Cylindrical
Lock
Branding Guidelines For Installation Instruction Sheets
Endorsed Logo
* Must Be Used On All Single Page and Multiple Page Installation Instruction Sheets
Group Brand Tagline
* Must Be Used On The Bottom Left Of
ALL ONE PAGE
Installation Instruction Sheets
* Must Be Used On The Bottom Left Of
ALL INSIDE
PAGES
of Multiple Page Installation Instruction Sheets
* It is
NOT USED
On The Back Page Or Back Cover Of Installation Instruction Sheets
* Image Must Be Used - CANNOT Be Typed
Corporate Statement
* Must Be Used On The
BACK PAGE
Or
BACK COVER
Of All Multiple Page Installation Instruction Sheets
* Image Must Be Used - CANNOT Be Typed
* A 2 line Version and a 5 Line Version Of The Corporate Statement Image Are Available
Copyright Statement
* Must Be Used On The Bottom of
ALL ONE PAGE
Installation Instruction Sheets
* Must Be Used On The Bottom of The
BACK PAGE
OR
BACK COVER
Of All Multiple Page Installation Instruction Sheets
* Copy Can Be Typed
Copyright © 2008 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.
Note: Marketing will continue to be part of the instruction sheet and template reviewing process
mlw - 07/25/08
Branding Guidelines For Installation Instruction Sheets
Endorsed Logo
* Must Be Used On All Single Page and Multiple Page Installation Instruction Sheets
Group Brand Tagline
* Must Be Used On The Bottom Left Of
ALL ONE PAGE
Installation Instruction Sheets
* Must Be Used On The Bottom Left Of
ALL INSIDE
PAGES
of Multiple Page Installation Instruction Sheets
* It is
NOT USED
On The Back Page Or Back Cover Of Installation Instruction Sheets
* Image Must Be Used - CANNOT Be Typed
Corporate Statement
* Must Be Used On The
BACK PAGE
Or
BACK COVER
Of All Multiple Page Installation Instruction Sheets
* Image Must Be Used - CANNOT Be Typed
* A 2 line Version and a 5 Line Version Of The Corporate Statement Image Are Available
Copyright Statement
* Must Be Used On The Bottom of
ALL ONE PAGE
Installation Instruction Sheets
* Must Be Used On The Bottom of The
BACK PAGE
OR
BACK COVER
Of All Multiple Page Installation Instruction Sheets
* Copy Can Be Typed
Copyright © 2008 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.
Note: Marketing will continue to be part of the instruction sheet and template reviewing process
mlw - 07/25/08
