12
Front
Housing
Assembly
Push TABS in
Direction of
of arrows to remove
Reverse to Re-Insert
P4 (Prox Antenna
Harness)
Keypad/Controller
REMOVE ANTENNA FROM
KEYPAD/CONTROLLER BY
PRESSING FOUR SECURE
TABS INWARD UNTIL
ANTENNA POPS OUT
Installation and Wiring Instructions for Corbin Russwin WM800
2.5 Performing a Secure Installation
(keypad/controller away from prox antenna)
In this configuration, the WM800 prox sensor housing is removed from the
keypad/controller and located a maximum of 10 feet away. The controller/keypad is
located inside a secure area.
1. Disconnect the backplate of the WM800 unit from the front
keypad/controller.
• When handling the main pr
inted circuit board, to guard against possible static
discharges, touch a grounded object BEFORE touching the WM800 unit.
Remove the main printed circuit board by pressing the two spring tabs in the
direction of the arrows as shown in Figure 5. Be careful with the wires.
• Pull on the main circuit board and remove
Pin connector P4 (a
4-pin connector)
from the bottom of the main board. A ribbon cable now holds the main board to
the keypad board. DO NOT pull this ribbon cable out of its connector! Once the
main board is removed, you can access the interior of the antenna.
--
Figure 5 Removing/Inserting Printed Circuit Board
2. Remove the antenna housing from the keypad/controller by pressing the four
secure tabs inward (see Figure 6) until the sensor housing pops out.
Figure 6 Removing Prox Antenna
Tabs
Branding Guidelines For Installation Instruction Sheets
Endorsed Logo
* Must Be Used On All Single Page and Multiple Page Installation Instruction Sheets
Group Brand Tagline
* Must Be Used On The Bottom Left Of
ALL ONE PAGE
Installation Instruction Sheets
* Must Be Used On The Bottom Left Of
ALL INSIDE
PAGES
of Multiple Page Installation Instruction Sheets
* It is
NOT USED
On The Back Page Or Back Cover Of Installation Instruction Sheets
* Image Must Be Used - CANNOT Be Typed
Corporate Statement
* Must Be Used On The
BACK PAGE
Or
BACK COVER
Of All Multiple Page Installation Instruction Sheets
* Image Must Be Used - CANNOT Be Typed
* A 2 line Version and a 5 Line Version Of The Corporate Statement Image Are Available
Copyright Statement
* Must Be Used On The Bottom of
ALL ONE PAGE
Installation Instruction Sheets
* Must Be Used On The Bottom of The
BACK PAGE
OR
BACK COVER
Of All Multiple Page Installation Instruction Sheets
* Copy Can Be Typed
Copyright © 2008 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.
Note: Marketing will continue to be part of the instruction sheet and template reviewing process
mlw - 07/25/08
Branding Guidelines For Installation Instruction Sheets
Endorsed Logo
* Must Be Used On All Single Page and Multiple Page Installation Instruction Sheets
Group Brand Tagline
* Must Be Used On The Bottom Left Of
ALL ONE PAGE
Installation Instruction Sheets
* Must Be Used On The Bottom Left Of
ALL INSIDE
PAGES
of Multiple Page Installation Instruction Sheets
* It is
NOT USED
On The Back Page Or Back Cover Of Installation Instruction Sheets
* Image Must Be Used - CANNOT Be Typed
Corporate Statement
* Must Be Used On The
BACK PAGE
Or
BACK COVER
Of All Multiple Page Installation Instruction Sheets
* Image Must Be Used - CANNOT Be Typed
* A 2 line Version and a 5 Line Version Of The Corporate Statement Image Are Available
Copyright Statement
* Must Be Used On The Bottom of
ALL ONE PAGE
Installation Instruction Sheets
* Must Be Used On The Bottom of The
BACK PAGE
OR
BACK COVER
Of All Multiple Page Installation Instruction Sheets
* Copy Can Be Typed
Copyright © 2008 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.
Note: Marketing will continue to be part of the instruction sheet and template reviewing process
mlw - 07/25/08
