13
Installation and Wiring Instructions for Corbin Russwin WM800
3. Prepare the wiring and extension wiring as follows:
• Cut off the plastic connector of
the WM800 sensor housing harness (Figure 7).
• Splice the recommended remote antenna cable Alpha 1174C (22AWG),
field supplied 10-foot maximum length, to the properly cut antenna cable using
standard electrical techniques.
REMOTE INSTALLATION SITE
Figure 7 Remote Installation of Prox Antenna
4. Mount the antenna backplate in a vertical orientation (Figure 7) and secure it to the
wall through the two screw holes using the two screws provided. Ensure that the two
weep holes, provided to remove possible moisture, are positioned on the bottom.
The wiring exits in the antenna backpl
ate. (Four external cut-outs on the antenna
backplate match the four spri
ng-loaded tabs on the antenna.)
NOTE:
Two side cut-outs are furn
ished on the antenna backplate for the wiring, if the
installation does not permit the wiring to run through the wall. These must be cut out
to be used.
• Once the antenna backplate is mounted
properly, align the antenna to the backplate
and connect the antenna to the antenna backplate. The large tab in the center of
the antenna assembly must be broken off before being attached to the antenna
backplate.
5. Refer to the Wall Mount Installation instructions and Figure 2 for backplate and
communication board installation.
2 Wiring Exits
MAX 10 feet from Keypad /Controller
Antenna
Backplate
2 Screw
Holes
2 Optional
side cut-outs
2 Weep Holes
Cut off plastic connector
Prox
Sensor
Housing
(antenna)
4 Spring
4 External cut-outs
(match spring loaded tabs )
Loaded Tabs
Branding Guidelines For Installation Instruction Sheets
Endorsed Logo
* Must Be Used On All Single Page and Multiple Page Installation Instruction Sheets
Group Brand Tagline
* Must Be Used On The Bottom Left Of
ALL ONE PAGE
Installation Instruction Sheets
* Must Be Used On The Bottom Left Of
ALL INSIDE
PAGES
of Multiple Page Installation Instruction Sheets
* It is
NOT USED
On The Back Page Or Back Cover Of Installation Instruction Sheets
* Image Must Be Used - CANNOT Be Typed
Corporate Statement
* Must Be Used On The
BACK PAGE
Or
BACK COVER
Of All Multiple Page Installation Instruction Sheets
* Image Must Be Used - CANNOT Be Typed
* A 2 line Version and a 5 Line Version Of The Corporate Statement Image Are Available
Copyright Statement
* Must Be Used On The Bottom of
ALL ONE PAGE
Installation Instruction Sheets
* Must Be Used On The Bottom of The
BACK PAGE
OR
BACK COVER
Of All Multiple Page Installation Instruction Sheets
* Copy Can Be Typed
Copyright © 2008 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.
Note: Marketing will continue to be part of the instruction sheet and template reviewing process
mlw - 07/25/08
Branding Guidelines For Installation Instruction Sheets
Endorsed Logo
* Must Be Used On All Single Page and Multiple Page Installation Instruction Sheets
Group Brand Tagline
* Must Be Used On The Bottom Left Of
ALL ONE PAGE
Installation Instruction Sheets
* Must Be Used On The Bottom Left Of
ALL INSIDE
PAGES
of Multiple Page Installation Instruction Sheets
* It is
NOT USED
On The Back Page Or Back Cover Of Installation Instruction Sheets
* Image Must Be Used - CANNOT Be Typed
Corporate Statement
* Must Be Used On The
BACK PAGE
Or
BACK COVER
Of All Multiple Page Installation Instruction Sheets
* Image Must Be Used - CANNOT Be Typed
* A 2 line Version and a 5 Line Version Of The Corporate Statement Image Are Available
Copyright Statement
* Must Be Used On The Bottom of
ALL ONE PAGE
Installation Instruction Sheets
* Must Be Used On The Bottom of The
BACK PAGE
OR
BACK COVER
Of All Multiple Page Installation Instruction Sheets
* Copy Can Be Typed
Copyright © 2008 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.
Note: Marketing will continue to be part of the instruction sheet and template reviewing process
mlw - 07/25/08
